PET Pelletizing Machine
video

PET Pelletizing Machine

The PET pelletizing machine that processes PET (polyethylene terephthalate) raw materials (which may be bottle flakes, waste silk, block waste, etc.) through a series of processes, and finally processes them into pure and uniform PET recycled particles (rPET). These particles are important raw materials for manufacturing products such as polyester staple fibers, sheets, preforms, and packaging belts.
Send Inquiry
Product Introduction

The PET pelletizing machine that processes PET (polyethylene terephthalate) raw materials (which may be bottle flakes, waste silk, block waste, etc.) through a series of processes, and finally processes them into pure and uniform PET recycled particles (rPET). These particles are important raw materials for manufacturing products such as polyester staple fibers, sheets, preforms, and packaging belts.

Its core purpose is to recycle, purify, and homogenize waste or unformed PET materials so that they can be reused in industrial production, which is a key equipment for achieving a circular economy for PET.

 

 
PET pellets
 
product-800-600
PET pellets
product-800-600
PET pellets
product-800-600
PET pellets

 

 

 

The main components of PET pelletizing machine

 

A complete PET pelletizing machine typically consists of the following systems:

1. Pre treatment system is crucial for the cleaning process of recycled materials, especially waste bottle fragments.

·Label removal machine: removes labels (mainly PVC or PE materials) and bottle cap rings from the bottle body.

·Crusher: Crush whole bottles or large pieces of waste into Flakes of a certain size.

·Hot washing machine: By using heated alkaline cleaning solution, it effectively removes stubborn pollutants such as oil, glue, and grease.

·Friction cleaning machine: utilizing high-speed friction between materials and equipment, as well as between materials, to peel off and remove residual stains attached to the surface of bottle sheets.

·Floating tank/floating separation tank: Utilizing the different impurity densities of PET, PVC, bottle caps (PP/PE), etc., separation is achieved through water flow (PET sinks to the bottom, PVC and PE float up).

·Rinse machine: Use clean water for final rinsing to ensure the cleanliness of the bottle slices.

·Dehydration machine: A high-speed centrifuge is used to remove the moisture from the cleaned bottle slices, reducing subsequent drying energy consumption.

·Drying system: Typically, a hot air dryer is used to thoroughly remove surface water and some crystalline water from the bottle slices.

 

2. The Extrusion System is the "heart" of the granulation line, responsible for melting and plasticizing solid PET.

·Hopper and feeder: stably and uniformly feed the dried PET sheet or powder into the extruder.

·Extruder: Core equipment, mostly twin-screw extruders (same direction meshing type). Its advantages lie in:

·Excellent mixing and self-cleaning ability: capable of fully homogenizing materials and color masterbatch.

·Efficient devolatilization function: Through the vacuum exhaust port, the moisture and small molecule impurities in the melt are effectively extracted, which is the key to ensuring the intrinsic viscosity (IV value) of PET.

·Melt filter: an extremely important component. Used for filtering small solid impurities (such as carbide particles, sand particles, metal debris, etc.) in the melt. Divided into:

·Continuous belt filter: production does not stop, automatic replacement of filter screen, high efficiency, is the mainstream choice.

·Plate type screen changer: requires manual or hydraulic screen replacement after shutdown, suitable for scenarios with small output or low requirements.

 

3. The Pelletizing System cools the extruded molten strip and cuts it into pellets.

·Die head: Extrude multiple uniform PET melt fine strips.

·Cooling water tank: Quickly cool and solidify the molten strip in water to prevent adhesion.

·Dehydrator/fan: removes moisture from the surface of strip-shaped objects.

·Granulator: Cut dry strips into cylindrical particles of uniform size.

 

4. Post processing system

·Vibration screen: Separate long strips, crushed particles, and qualified particles from the particles to ensure particle uniformity.

·Finished product cooling and packaging: After further cooling, the particles are packaged in ton bags or bags.

 

5. Control System: Modern PET pelletizing machines are highly automated, using PLC (Programmable Logic Controller) or DCS (Distributed Control System) to centrally control the entire production process, monitoring key parameters such as temperature, pressure, vacuum degree, and speed to ensure stable product quality.

 

Key technical points of PET pelletizing machine

 

1. Drying and pre crystallization: PET is a hygroscopic material and a crystalline polymer. If the moisture content of the raw material is high, hydrolysis degradation will occur during melt extrusion, resulting in molecular chain breakage, a significant decrease in intrinsic viscosity (IV value), and the product becoming brittle. Therefore, it is necessary to reduce the moisture content to below 50ppm (0.005%) through strong drying.

 

2. Control of intrinsic viscosity (IV value): IV value is the core indicator for measuring the molecular weight and quality of PET.

·Degradation: Moisture, excessive temperature, and prolonged residence time can all lead to a decrease in IV value.

·Thickening: The IV value can be increased through solid-state polymerization (SSP) process, but this is usually an independent "thickening line" and does not belong to the category of basic granulation lines. The goal of the basic granulation line is to maximize the retention of the IV value of the raw materials.

 

3. Filtration accuracy: The mesh size of the filter directly determines the purity of the finished particles and is an important indicator for distinguishing between high and low-end products. High end products require the use of high mesh filters for precise filtration.

 

Types of PET pelletizing machines

 

According to different requirements for raw materials and products, they are mainly divided into:

·Bottle cleaning and granulation line: mainly used for recycling waste PET water bottles, with the longest and most complex process, and the core lies in cleaning and separation technology.

·PET waste silk/waste block granulation line: The raw materials are relatively clean, the process is short, and the focus is on melting, filtering, and homogenization.

·PET/PE composite material separation granulation line: The technical difficulty is high, and it is used to process PET/PE composite packaging materials (such as baby bottles), requiring special extruder design to achieve the separation of two polymers.

 

Application Fields

 

The PET particles produced are widely used in:

·Chemical fiber industry: Manufacturing polyester staple fibers for filling materials, non-woven fabrics, carpets, clothing, etc.

·Packaging industry: manufacturing non food contact packaging sheets, vacuum formed trays, packaging tapes, etc.

·Injection molding industry: manufacturing various industrial parts.

·Sheet and board: Used for the manufacturing of industrial boards.

With the development of technology, rPET particles can now meet food grade standards through advanced deep cleaning and purification techniques for remanufacturing beverage bottles, known as "bottle to bottle" recycling, which is currently the highest level and trend of industry development.

 

In summary, the PET pelletizing machine is a complex system that integrates machinery, chemical engineering, and automation control. Its technological level directly determines the quality and value of recycled PET products, and it is the core equipment in the plastic recycling industry.

PET flakes plastic pelletizing granulator machine are applied to the waste materials, which needs high processing performance of melting, volatilization, filtering etc., mainly works for the job of PET scraps recycling and re-pelletizing.

 

PET plastic granulator machine with international advanced recycling technology and combined with the actual application condition. This PET plastic granulator machine is design specializes for recycling the recycled washed plastic PET plastic flakes/scraps, such as Cola plastic bottle flakes/scraps, purified water bottle flakes/scraps, PET sheet flakes/scraps, PET drinking bottle flakes/scraps etc.

After processing techniques such as feeding, heating, melt, cooling, drying, cutting etc., the final products are PET plastic pellets/granules that can be to produce new PET plastic products.

 

Features of PET plastic pelletizing machine

 

The screw is made of high tool steel 38 CrMoALA or W6Mo5Cr4V2. Special screw combination Euro-style rectangle barrel, reflux refrigeration channel optimized and disposed, which makes temperature difference in D areas smaller. Co-rotating Twin Screw Extruder with High Torque Gearbox. Due to high torque gearbox, The specific torque of gearbox is 10.3 N.m/cm3, So we can process PET in lower temp & lower speed, but high output.

Innovated design of heater-tightened style insures high efficiency of heat transfer and high longevity of heater.

The material is used high quality nitride steel, corrosion proof or antifriction with corresponding processed special designed two sets of vacuum. The vacuum system is used for removing moisture & volatile matter from PET. It is assembled with vacuum pumps & collecting tank. With PLC and HMI control for interlock, you will get the vacuum level less than 0.3Kpa. It is very close to the ultimate vacuum. You will get PET with IV drop less than 5%, it is about 0.05dl/g.

 

The selected material of drive components is dainty, including super intention alloy, cementiteing steel, cementiting and grinding.

New Under Water Strand Pelletizing Machine system: The strand go into the pelletizer by the water flow, even the strand is break during changing the filter, there will no waste after starting.

We can control the temperature of the final pellets. We can make it hot, if you want to crystallize the final pellet. It will save the energy to heat up the pellets.

 

Model

Screw Diameter

Screw L/D

Second Screw L/D

Main Motor Power

Capacity

SHJ85

85mm

28-33:1

10-12:1

55KW

150-200kg/hr

SHJ100

100mm

28-33:1

10-12:1

75KW

200-300kg/hr

SHJ130

130mm

28-33:1

10-12:1

90KW

300-400kg/hr

SHJ150

150mm

28-33:1

10-12:1

110KW

400-500kg/hr

 

Hot Tags: pet pelletizing machine, China pet pelletizing machine manufacturers, suppliers, factory, polystyrene recycling equipment, shredding plastic machine, household plastic shredder, pp granulator machine, pet flakes to fiber machine, pet bottle recycling machine price

Send Inquiry

whatsapp

Phone

E-mail

Inquiry